I have a SHARP - LQ070T3AG02 TFT LCD, I would like to use it for something, but I dont know how to work it. I took it out of an xbox monitor (it had two quite big circuit boards controlling sound and brightness). the pinout is as follows
1 - HYS I,O - HORIZONTAL SYNC 2 - VSY I,O - VERTICAL SYNC 3 - CLK I,O - DDC CLOCK 4 - NTP I - CHANGE mode Pal/NTSC 5 - HRV I - HORIZONTAL SCAN DIRECTION 6 - VRV I - VERT SCAN DIRECTION 7 - VSW I - SELECTION FROM TWO INPUTS 8 - CLKC I - CHANGE the IO direction of CLK, HSY, VSY 9 - VCDC I - DC BIAS voltage adjust 10 - VIN I - POSITIVE VOLTAGE 11 - VBS I - COMPOSTE Signal Seperator 12 - BRT I - BRIGHT ADJUST 13 - VR1 I - RED 14 - VG1 I - GREEN 15 - VB1 I - BLUE 16 - GND1 I - GND 17 - VR2 I - RED 2 18 - VG2 I - GREEN 2 19 - VB2 I - BLUE 2 20 - GND1 I - 21 - VBL I - 22 - VBL I - 23 - GND2 I - 24 - GND2 I -
Can someone tell me would it be a simple as connecting power to 10,16 and my video signal to 11?
 lines 1,2,7,9,10,17 are not connected the following pins are connected 4,16 - 4 ->gnd = pal? 5, -. I assume sharing the same value? 21,22 - only seem to be connected to each other 23,24 - only seem to be connected to each other
I would like to use this with a composite signal, perhaps s-video. I would be endlesly greatful for any help with this. Thankyou.