|
|
Post by gmoon on Nov 28, 2006 8:49:03 GMT -5
Lets see...... I used a Tenergy universal smart charger(7.2v-12v). I made a cable with a barrel plug to use the existing dc jack of the Lynx. Of course the charger says don't recharge packs with less than 1100ma, so I had to use a resistor to drop the charging current down enough to charge the battery pack without overheating the batteries. Which I am still experimenting with that too. Nice! Yeah, you don't want those batteries going 'sony' on you... |
|
|
|
Post by baiatbelea on Feb 13, 2007 5:17:04 GMT -5
plsss help meee!!!
i have the same dtv with 3,5' display(PM-35NP) and i don't know how 2 set the PAL mode
it goes automaticaly in the NTSC mode when it start up
i need an answer soon! please!! sorry 4 my english! i'm from romania
thanks!
|
|
|
|
Post by baiatbelea on Feb 14, 2007 10:09:03 GMT -5
anyone???
please!!! i need this dtv!!!
|
|
|
|
Post by jpilkinton on Mar 3, 2007 4:29:27 GMT -5
Are you using a NTSC DTV? The lcd screen is supposed to switch between NTSC and PAL signals. Although I didn't have a PAL dtv at the time of this project, I couldn't tell you. I do have a PAL dtv now, but it's too late...
I would search on the net about converting NTSC to PAL and see what is ivolved of doing that.
Where did you buy that lcd screen at?
John
|
|
|
|
Post by racob on Mar 3, 2007 10:07:11 GMT -5
Your new DTV is one of the best I have seen (pulblished pics) on this forum
Can you still publish who the seller of the Lynx unit...it is hard to find one in my area (BC, Canada). Also -- I am going to look for the 3.5LCD but if you have a source, please let share it with me as well..
I was looking at the old GBA portable unit but the screen is dark. Also considered using a GBA sp unit but it is still expensive these days... so my interests is not fully there yet.
1541DTV ---can we try to get Pyrofer change his mind again - to sell a 4th Batch...I really would like to get my hands on it...
|
|
|
|
Post by racob on Mar 9, 2007 1:05:16 GMT -5
JP,
I take it, the original Lynx screen is not suitable to use for the project...right? or could it be interfaced with the DTV...reason for asking is I may have source for the Lynx...but can not find any source yet for the 3.6" LCD..
Thanks
|
|
|
|
Post by jpilkinton on Mar 23, 2007 14:04:03 GMT -5
JP, I take it, the original Lynx screen is not suitable to use for the project...right? or could it be interfaced with the DTV...reason for asking is I may have source for the Lynx...but can not find any source yet for the 3.6" LCD.. Thanks Nope, you have to have a driver for it and there is none available that I know of. As for a source for the 3.5" lcd screen, look on ebay. That is where I found this screen. And for a reasonable price. I still haven't added the second joystick port to the handheld as time is VERY limited on my end. Thanks for your comments though. |
|
