|
Post by bobf4 on Feb 15, 2008 18:50:24 GMT -5
I'm undertaking getting Qlink reloaded running using WinVICE on my Windows Vista machine. But, I can't seem to get Qlink loaded. I get to Connecting, then it sits there. What settings do I have to change? Also, if possible, I need to get the name Bob F4 reset in Qlink. Now, I saw someone got an image of the PlayNET disks up. If possible, can someone please either send it to me, or send me a good link to it? I tried the links in the forum, but they were dead ends.
|
|
MikeAZ1
Full Member
Qlinker of the 80's
Posts: 157
|
Post by MikeAZ1 on Feb 16, 2008 10:05:01 GMT -5
Hi Is your RS232 Settings correct the IP Address is 66.135.39.36:5190 and is your Qlink Disk image setup with modem set at Other Command driven modems 1200baud , automatic dialing and tone and a phone # of (just a dummy number) of +5551212
Those settings work for me with winvice
for those needing to know how to setup the Qlink disk Attach it as to drive 8 in Winvice and then
LOAD"Change Access",8,1 and choose the 1st option of changing settings
Hope this helps Mike
|
|
ken
Newbie
Posts: 11
|
Post by ken on Feb 26, 2008 10:34:44 GMT -5
Hi Is your RS232 Settings correct the IP Address is 66.135.39.36:5190 and is your Qlink Disk image setup with modem set at Other Command driven modems 1200baud , automatic dialing and tone and a phone # of (just a dummy number) of +5551212 for those needing to know how to setup the Qlink disk Attach it as to drive 8 in Winvice and then LOAD"Change Access",8,1 and choose the 1st option of changing settings Hope this helps Mike Those settings work for me using the QlinkWinVice package downloaded off of the Qlink Reloaded website, but not using any newer version of WinVice. But I get stuck right after entering a username. Hiting f5 doesn't appear to do anything for me. Even just getting that far brings back a lot of old memories. I'll keep trying.
|
|
ken
Newbie
Posts: 11
|
Post by ken on Feb 26, 2008 11:06:20 GMT -5
DOH! Got it working after using F Lock =)
|
|
MikeAZ1
Full Member
Qlinker of the 80's
Posts: 157
|
Post by MikeAZ1 on Feb 26, 2008 18:32:34 GMT -5
one of my pc's does that too the Flock is off and i think something went wrong
|
|
|
Post by bobf4 on Mar 9, 2008 21:14:22 GMT -5
I got it. turns out it was the RS-232 settings that were off.
|
|