Request for Clarification -------------------------------
When you disconnect the ADC lines from the User Port lines, does it disable the steering wheel ? So if someone wants to add the joystick port or add 8 additional buttons to each of the user port data lines or use the user port lines for other purposes but still will want to option to use the steering wheel, is it still possible.
I am just trying to figure that out. I apologize in advance for not looking through past posts but they been awhile and will probably take too long and possibly longer than a simple answer. I'll look but I will want to get the answer pretty quickly.
In addition, I am also looking into how to use a light-pen with the Hummer via User Port, besides obvious re-writing which port to read. In theory, it seems like it should work if I am passing the sensing to trigger the read/write. I am not sure but it would be interesting to pull this off.
Last Edit: Sept 14, 2011 1:13:28 GMT -5 by Wildstar
Post by expertsetup on Sept 24, 2011 1:54:39 GMT -5
IIRC you dont need to cut the adc lines to use the userport joystick.
Once the lines are cut it mat not be possible to reconnect them. I recommend not cutting the traces. I have a hummer with the ADC still connected as well as userport joystick works fine, gimme some time to pull it out and take a look.