|
Post by raymond61 on Nov 3, 2010 9:36:58 GMT -5
I got the kit for the Comet64 Internet Modem. It's very good. It plugs in the user port and has a Ethernet port on it. I had to set it's config up to get on the not the official Q-Link reloaded like this: +++ <wx184 .106.222.254> <wn5190> <wb8800> <wr> The 1ST line get it in config mode. 2ND line the IP of Q-Link. 3RD line the port. 4TH line the baud, 1200 with stop bits and stuff. The 5TH line saves it to it's little flash memory. I am on Q-Link right now in the Lobby but no one else there. I did leave a message on it about this. I paid about $70 for the kit. It's very nice. I all ways wanted a User port cart. with Ethernet on it instead of a phone line port. To get on Q-Link I picked other modem and then have to hit RETURN as soon as it boots up there. You can get more info. about the Comet64 Internet Modem from: commodoreserver.com-Raymond Day
|
|
|
Post by raymond61 on Nov 5, 2010 17:59:32 GMT -5
That command should be right but because it changes baud form 2400 to 1200 it don't work good. But you can go to: www.wiznet.co.kr/Sub_Modules/en/product/product_detail.asp?Refid=222&page=1&cate1=5&cate2=8&cate3=0&pid=1039&cType=2and download a program for a PC that can talk to it though the LAN or Ethernet and do settings up in it. That's how I done it. For Q-Link you run the "WIZ100SR/105SR/110SR Configuration Tool ver 3.0.2" and click Search. It find the Comet64 mac address fast and you can then go under the Network tab and change the Server IP to: 184.106.222.254 and the port next to it to 5190 Then on the Serial tab the speed change to 1200 then click the Setting icon and it will save that. Then can get on Q-Link. -Raymond Day
|
|
|
Post by raymond61 on Oct 11, 2011 7:43:23 GMT -5
I think people will know what I am taling about with some pic. This is the board plugged in the back user port of my Commodore 128. Attachments:
|
|
|
Post by raymond61 on Oct 11, 2011 7:47:21 GMT -5
The other is the config tool were you can set it's settings over the Ethernet cord. This is my settings on it for Q-Link reloaded. Attachments:
|
|