Ok I'm getting major DT's to get back onto Q-Link! It's been down for a long time - I'm hoping that perhaps it will be reopened soon - perhaps in November for the 25th anniversary? Does anyone know the current status of the project?
I have not got on Q-Link Reloaded for a wile not. Because I moved my Linux server to the same PC I am running Windows 7 on. Using VirualBox.
It's hard to set it up but when it set up it works good. It was hard to set up RS-232 all so and I just got that part working today.
But it would not get on Q-Link. I got on here and used the q-link.swrap.org:5190 But when I got on it ask for all my info. like I never was on there.
I went to the message board and all the old messages are gone! Over 2 years worth. I guess this is a copy of Jim's Q-Link Reloaded and it my be a older copy.
What happened to Jim's Q-Link Reloaded?
My /ect/rc.local looks like this now:
#!/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing.
# With Ubuntu can install tcpser with "apt-get install tcpser" then just have to type tcpser to run it.
# Got it working with VirtualBox now. 2 RS-232 to USB addaptors on /dev/ttyUSB0 and /dev/ttyUSB1 Today on 10/19/2010
# tcpser -d /dev/ttyS0 -s 1200 -i"e0&k0&c0" -n"5551212"=22.214.171.124:5190& # tcpser -d /dev/ttyS1 -p 6401 -s 1200 -i"e0&k0&c0" -n"5551212"=126.96.36.199:5190& tcpser -d /dev/ttyUSB0 -p 6402 -s 1200 -i"e0&k0&c0" -n"5551212"=q-link.swrap.org:5190& # On Oct-11-2006 a domain squatter got quantum-link.org from then just the IP of 188.8.131.52 port 5190 works. # I think it was on Jan-27-2007 that they got a new domain name "go.quantumlink.tk" says it's registered for 2 years. I am going to change the IP "184.108.40.206" to the new domain name. # On April 13, 2007 they moved the server and go.quantumlink.tk did no carrier. So I Changed it to the IP Jim said to on 4/3/07 "Try 220.127.116.11 as the IP." # On January 1, 2008 I test the go.quantumlink.tk and it works! # On January 17, 2008. Got caller ID working with mgetty. But then tcpser stopped working on a reboot. Going to set this tcpser to start before mgetting if I can. # On October 19, 2010. Because it took me so long to get on Q-Link Reloaded. They started a new one at q-link.swrap.org:5190 looks like it's a copy of Jim's Q-Link code and not all is working and have to get on as a new name 1ST time!